TEL CLEAN TRACK ACT 8
TEL CLEAN TRACK ACT 8 200mm
The TEL CLEAN TRACK ACT 8 is a coater/developer track system used for photoresist processing in semiconductor lithography. Global TechSolutions supports ACT 8 equipment through refurbishment, installation, preventive maintenance, troubleshooting and on-site field service.
TEL CLEAN TRACK ACT 8 Overview
The Tokyo Electron CLEAN TRACK ACT 8 is a semiconductor coater/developer platform used in photolithography. The system supports wafer processing steps associated with applying photoresist, developing exposed resist patterns and controlling wafer temperature during the lithography process.
ACT 8 systems are used for wafers up to 200mm and can be integrated with lithography exposure equipment as part of a track-and-scanner process flow.
Global TechSolutions supports TEL CLEAN TRACK ACT 8 equipment with refurbishment and field service for semiconductor manufacturers looking to keep existing 200mm lithography equipment in operation.
Process Applications
TEL CLEAN TRACK ACT 8 systems support photoresist processing steps used before and after wafer exposure during semiconductor lithography.
Photoresist Coating
Spin coating is used to apply a controlled photoresist layer across the wafer surface before lithography exposure.
Photoresist Development
Development removes selected resist areas after exposure to form the required patterned resist layer on the wafer.
Bake and Thermal Processing
Integrated thermal processing supports resist preparation and post-exposure processing as part of the lithography sequence.
Support for TEL CLEAN TRACK ACT 8
Global TechSolutions supports TEL CLEAN TRACK ACT 8 equipment with refurbishment, installation, preventive maintenance, troubleshooting and on-site field service.
Equipment Refurbishment
Inspection, refurbishment and replacement of parts and assemblies based on equipment condition and the agreed work scope.
Installation and Commissioning
On-site installation, setup and commissioning support for refurbished or relocated equipment.
Preventive Maintenance
Planned inspection and maintenance to support equipment operation and reduce the risk of unplanned downtime.
Troubleshooting and Field Service
On-site technical support for equipment faults, system checks and maintenance requirements.
Testing and Qualification
Where applicable, refurbished equipment and repaired assemblies can be tested in our cleanroom before delivery or installation.
Our facility allows equipment functions and performance to be checked under controlled conditions designed to mimic fab operating requirements. Final verification is based on the agreed refurbishment scope and acceptance criteria.
Verification Before Release
Testing is carried out according to the equipment condition, completed work and agreed requirements.
Interested to find out more?
Contact us today for expert guidance